How to Crack wifi network’s password (WEP)
Wireless Hacking Using Backtrack
Introduction
Hello and welcome to my tutorial about wireless networking.
Today I’ll be teaching you how easy it is to obtain access to a wireless protected network by cracking the Wi-Fi network’s password.
There are
lots of questions coming from the beginners on how to get WEP/WPA/WPA2
password and accessing neighbor’s connection.
I will be covering all of the aspects and ways of hacking a network and gaining access to the router.
How to crack WEP Password
What u need to succeed ?
- A compatible wireless adapter—This is the biggest requirement. You’ll need a wireless adapter that’s capable of packet injection, and chances are the one in your computer is not.
- A BACKTRACK CD-Download yourself a copy of the CD and burn it, or load it up in VMware to get started.
- A nearby WEP-enabled Wi-Fi network. The signal should be strong and ideally people are using it, connecting and disconnecting their devices from it.
Okay
so let’s begin, so first we need to open a terminal. To do that, just
click the little icon that’s on the right side from System. Please see
the image below:
STEP 1:
Type the command- airmon-ng
This command displays our interfaces.In my case I have wlan0, and now we are going to put it into monitor mode.
STEP 2:
Type- airmon-ng start wlan0.
As you can
see on the picture below it says (monitor mode enabled on mon0), and we
are going to be using mon0 instead of wlan0 as our interface.
STEP 3:
Type airodump-ng mon0 and that will start scanning for Wi-Fi networks. As you can see, there is a network called SKIDHACKER. Take a note of the BSSID the DATA, the CHANNEL and the type of ENCRYPTION. Please refer to the image below, if you have any trouble getting to that point.
STEP 4:
Now we are going to set it to lock on a specific network named SKIDHACKER. To do that, type airodump-ng -c (channel) -w WEPcrack –bssid (bssid of the network) mon0. Replace (channel) with the channel of the victim’s network, and replace (bssid of the network) with the bssid of the victim’s network.
Okay
so as you can probably see the data is going really slow, and we need
to boost that up. We are going to need a lot more data, so let’s preform
one of the aireplay commands that will boost that data.
STEP 5:
Firstly, open up a new terminal and type aireplay-ng -1 0 -a (bsisd) mon0 where(bssid) is the bssid of the network. Now if your Wi-Fi card is supported, you should see Association successful , if you don’t see that then your card is not supported.
Step 6:
Now we are going to type in aireplay-ng -2 -p 0841 -c FF:FF:FF:FF:FF:FF -b (bssid) mon0. And now when the question Use this packet ? pops up, just push the letter y. And now as you can see in the image below, the data went high drastically.
STEP 7:
Okay so now
lets open a new terminal and we are going to attempt to crack it with
the amount of data we have. I recommend getting over 20000 data before trying. So let’s type aircrack-ng WEPcrack*.cap.
Replace WEPcrack with the filename you chose before when capturing the
data, and don’t forget to add that asterisk after the file and the
extension which is .cap.
STEP 8:
And now it will attempt to get the password. Just wait a couple of minutes for it to complete, and once it did it will say KEY FOUND! [ XX:XX:XX:XX:XX ] where
the X’s will be random numbers and/or letters. That’s not it, now to
connect you will need to remove the semicolumns. For an example, if we
were to have 12:34:52:66:59, the password would be 1232526659.
Just log in to your Windows OS, and connect using that password.
TÜL PERDE MODELLERİ
ReplyDeleteSms onay
vodafone mobil ödeme bozdurma
Nft nasil alinir
Ankara Evden Eve Nakliyat
Trafik sigortası
DEDEKTOR
web sitesi kurma
Ask kitaplari
SMM PANEL
ReplyDeleteSmm panel
iş ilanları
İnstagram Takipçi Satın Al
hirdavatciburada.com
beyazesyateknikservisi.com.tr
SERVİS
tiktok jeton hilesi
minecraft premium
ReplyDeletenft nasıl alınır
yurtdışı kargo
uc satın al
en son çıkan perde modelleri
en son çıkan perde modelleri
lisans satın al
özel ambulans